首页 国产 亚洲 丝袜

    <bdo id="jm9aw"></bdo>
    1. <pre id="jm9aw"></pre><p id="jm9aw"></p>

        1. Wet Concrete Shotcrete Pump

          Download: PARAMETERS PDF

          Saintyol DAWIN Wet shotcrete machine with Continuous adjustable jet(CVT) and continuous adjustabe accelerator amount. Accelerating Agent adding and control technology,the domestic famous brand metering pump,accurate measurement of atomizing jet and nozzle material makes the accelerating agent mixed with concretemixing. Rebound degree is low,dry spray,concrete rebound degreee is 15%-50%,adopts the wet spray technology,resilient rate can be reduced to below 10%,effectivily saved the cost. Ask for a quote

          PRODUCT DETAILS

          Hydraulic Pump-type Wet Concrete Spraying Machine Shotcrete Pump

          At present, shotcrete machine is divided into two kinds: dry concrete spraying machine and wet concrete spraying machine.


          Both of them are commonly used for pouring such thin-walled structures as tunnel lining, walls and ceilings, as well as the covering layer of steel structure.

          Dry spraying machine mixes cement, sand and gravel in a dry and evenly state, a method to compress the air to deliver materials to the nozzle where they are mixed with pressure water for pouring; it must be operated by skilled personnel, and the particle size shall not be too large, however, as large amounts of cement are required and the jet velocity is large, which lead to severe dust pollution and rebound, its usage is thereby restricted.

          Wet spraying machine delivers well mixed concrete to the nozzle through conveying and pumping, and compressed air is added at the outlet of delivery pump, which makes materials and air fully integrate with one another in the pipe, so that perfused materials become more even. In addition, accelerator is sprinkled on the nozzle for making materials solidify rapidly and reducing the rebound rate. Besides, its working efficiency is higher than dry spraying machine as the mixture of materials can be easily controlled.

          Wet spraying machine is widely used for concrete spraying operation in places such as mine, tunnel, culvert, railway, hydro-power project, underground engineering and revetment.

          Main Characteristics of Hydraulic Pump-type Wet Spraying Machine

          The system is more reliable and delivery capacity is stable in adopting hydraulic pumping.

          It has large volume of delivery, long distance of delivery and high efficiency of construction.

          Sprayed concrete is of high performance and strength, as well as being dense and homogeneous.

          The main oil pump adopts variable displacement piston pump of constant power; and the delivery amount, which can be freely adjusted according to needs, is controlled by PLC.

          S pipe surfacing electrode of high strength, wear plate and cutting ring are inlaid with hard alloy of high strength, which not only improves the wear resistance, but increases the service life of parts.

          It is equipped with multi-point electric lubricating pump. And together with automatic and effective control of grease’s filling amount and time, contributing to the fact that the service life of wear-out parts are effectively increased.

          Air cooling avoids damage caused by water cooling in winter.

          Accelerator is added and controlled by metering pump of domestically famous brand, achieving accurate measurement and realizing stepless speed regulation.

          Harm on the health of operator is reduced by lowering dust concentration beside the machine and of the nozzle.

          Humanized design of product makes operation and maintenance become easier, with reliability effectively guaranteed as well.

          Configuration of Hydraulic Pumping Wet Spraying Machine:

          Power System: it adopts motor and diesel engine of domestically famous brand.

          Main Oil Pump: it adopts variable plunger pump, which guarantees the stable and reliable operation of system, while its overpressure relief function realizes the effective protection of main pump and motor.

          Lubrication System: it adopts separate lubrication of five points, and “point-to-point” lubrication guarantees that critical parts won’t be worn out, thus increasing their service life.

          Accelerator Metering Pump: reciprocating piston diaphragm pump is of high temperature resistance, erosion resistance and abrasion resistance, with high accuracy of measurement, and its speed can be regulated steplessly.

          Characters of electronically controlled reversing system: low pumping pressure and high reversing speed, which reduce reversal impact and operator’s labor intensity; two separate hydraulic circuits make the oil supply of system more stable; operation becomes simple and reliable through accurate control of PLC, which increases reversal speed of swing cylinder while reducing the reversal impact, at the same time, instantaneous action of large cylinder’s reverse is accelerated, making concrete cylinder become substantial, increasing the continuity of materials supply and realizing even discharge.




          Commutation System


          Plc accurate control

          makes two oil circuit

          interflow to greatly reduce 

          commutation time and impact

          Split Piston

          Use a hack-saw cut the piston in two vertical halves at right angles to the wrist pin with a grinding compound.


          Power System

          Electomotor adopts Yantai and Beide motor of Siemens;Diesel engine adpots Lovol and Volve Brand.





          Main Oil Pump

          The main oil pump apply 

          German HAWE,Rexroth 

          series and Japanese 

          Kawasaki Series.

          Accelerator Metering

          Reciprocating piston diaphragm pump is of high temperature resistance, erosion resistance and abrasion resistance.


          Hopper Device

          The Hopper is capacity-increased,coupled with fence and equipped with vibration motor to meet concrete pumping.





          Cooling System

          It adopts dual-cooling system, 

           with air cooling and water 

          cooling,not only for hot

          climate but also for cold 

          climate.

          Glassed Plate

          Glass plates and cut loops are made of anti-wearing horniness alloy,they have long service lives.


          Centralized lubricating

          The lubricant will be injected to the main oil line by the plunger pump and distributed to each lubrication point.


           

          Item

          Unit

          Parameter

          Concrete pump

          Max. theoretic concrete spray  volume 

          m3/h

          8

          Max. theoretic delivery pressure

          Mpa

          7

          Max. delivery frequency

          Times /min

          16

          Type of distribution valve

           

          S tube valve

          Main oil cylinder specification: cylinder dia./role dia.× stroke

          mm

          Φ140×1200

          Diameter of delivery cylinder

          mm

          Φ100

          Hopper Height

          mm

          1140mm

          Power system

          Engine Model

           

          1004-4 LOVOL

          Power

          kw

          56

          Rated Voltage

          V

          24VDC(2*12V,110Ah)

          Rated Speed

          r/min

          2200

          Fuel Tank

          L

          70

          Hydraulic system

          Type of Hydraulic oil circuit

           

          Open circuit

          Maximum oil pressure of main system

          Mpa

          25

          Hydraulic oil tank volume

          L

          200

          Other parameters

          Max. stone diameter

          mm

           

          15 When spray

           

          Pipeline inside diameter

          mm

          Φ57

          Boundary dimension  

          mm

          4500*1500*1550

          Weight

          kg

          2300

          Towing peed

          km/h

          8

          Working Video Link :

          https://youtu.be/bAgWYUpqNR4



          INQUIRE NOW

          Feel free to talk to our online representative at any time you please using our Live Chat system on our website or one of the below instant messaging programs. lease be patient while waiting for response. (24/7 Support!) Phone General Inquiries: +86 186 69798625

          首页 国产 亚洲 丝袜
            <bdo id="jm9aw"></bdo>
            1. <pre id="jm9aw"></pre><p id="jm9aw"></p>